Model F9222

Shackle Load Cell - Internally Amplified

Shackle Load Cell

Model F9222 Load Shackle features an internal amplifier to provide high output including ±0-5V, ±0-10V, or 4-20mA (2-wire).

By incorporating the load sensing capability into the legs of the shackle instead of in the pin, the sensor is always in the proper orientation for best results, even with a swinging or shifting load. Combining the outputs from the two sensing elements also provides exceptional repeatability.

The unit is built to survive in harsh industrial environments, and the hermetic construction conforms to IP67 for water resistance. This product is protected by US Design Patent D703,907S - other rights pending.

Product Specifications

ModelF9222F92C2SIL-3 (Option)
Nominal load Fnom                30 kN 
Combined error±5% F.S.±5% F.S.
Using load            150% Fnom 
Breaking load           >300% Fnom 
Nominal temperature range           +15 up to 70°C 
Service temperature range-45 up to +120°C- 20 up to +80°C
Temperature effect  
- span≤±0,1% actual value/ 10K≤±0,2% actual value / 10K
- zero≤±0,1% F.S./ 10K≤±0,2% F.S. / 10K
Protection EN 60 529 / IEC 529                 IP 67 
Noise emission Acc. EN 61326
Noise immunity Acc. EN 61326
Insulation reistance> 5 x 109 > 5 x 109 bzw. >5 G / 50 V
Electrical protection Reverse current protection Overvoltage-and Short-circuit protection
Analogue output  
- Output signal4…20mA 3-wire Span 16mA, ±2%4…16mA ; 3-wire system, Signal shift 4mA ±0,2 mA,others on request; via inline amplifierr
 - Power supply 12…40 VDC10…30VDC; supply unit SIL3-Relay 24VDC (+50%/-20%),power consuption. ca. 100 mW
- zero± 2% F.S. 
- electrical connectionPlug connection M12 x 1,4-pin Plug connection M12x1, 4-pin
Certifications / Approvals TÜV: 2005-08-11/tecsis
Material Stainless steel (force transducer and amplifier housing)